Monday, October 14, 2019

CAMIS MOTORS & DRIVES
DESIGN & MANUFACTURE OF ELECTRONICS SOLUTIONS

Home Blog

Celebrating 50 years in business!

0

From our base in the West Midlands, Camis Electronics provides design and manufacturing capabilities for a wide range of industrial applications including wiring looms, circuit boards and electro-mechanical controls & components. The Motors & Drives Division is a leading worldwide distributor of special AC and DC electric motors.

Call our friendly sales team today on 01384 286969

Celebrating 50 years in business!

0

From our base in the West Midlands, Camis Electronics provides design and manufacturing capabilities for a wide range of industrial applications including wiring looms, circuit boards and electro-mechanical controls & components. The Motors & Drives Division is a leading worldwide distributor of special AC and DC electric motors.

Call our friendly sales team today on 01384 286969

Camis offers specialist expertise and knowledge in motors and electronics

0
One of the flexible manufacturing areas for electronic components
One of the flexible manufacturing areas for electronic components

With an ongoing campaign to promote manufacturing in the Midlands, Camis offers diverse expertise and manufacturing capabilities from its base in Kingswinford. The motors and drives division is a leading distributor of specialist AC and DC electric motors while the electronics division offers design and sub-contract manufacturing for wiring looms, circuit boards and controls for a wide range of industrial applications. 

Thomas Marks, AEMT Secretary, looks at this remarkable member company and how its expertise is helping so many other manufacturers and businesses 

Across the world electric motors deliver essential power to millions of processes and applications, form the smallest DC servo motor to massive high voltage, multi-megawatt motors on oil and gas platforms. In every case, selecting the most appropriate motor will have a significant impact on performance and reliability. 

Camis Motors & Drives has several well-established relationships with principal manufacturers such as Winkelmann, Emod, Omec and Kaiser Morten. These enable the company to offer specialist motors for hazardous areas such as oil & gas platforms, mining applications and the marine sector. 

Sarah Rowland, Key Account Manager at Camis explains: “Those involved in specialist applications know exactly what specifications and certifications are required for their motors; our task is to select the most appropriate product and ensure it is delivered on time. Our understanding of these applications and the importance of reliability and performance are major benefits to our customers.” 

Sarah Rowland Key Account Manager for Camis Motors and Drives

Camis Motors & Drives also works with OEMs to ensure their products deliver the dependability that is required. For example, a gas fired turbine requires a continuous lubrication supply for smooth operation. So, if the electrical supply to the plant – and hence the lubrication pump motors – is lost, there is a risk of significant damage to the gas turbine. 

The solution is a back-up motor that can be powered by an emergency battery supply and brought online within seconds. The challenge is for the motor to deliver 100 percent reliability in the unlikely event that it is required; the cost of failure is not just the price of the repairs to the turbine, but also the loss of revenue from the generator that remains offline during the repairs. 

Similarly, there are other applications in power stations that require critical service protection, such as flood pumps that need to operate underwater during a power outage. Camis is able to source IP68, DC motors that are capable of delivering this vital service and ensure that a temporary loss of power has no lasting effect on the plant. 

For those with equipment operating in potentially explosive atmospheres, there is a considerable amount of certification that must be complied with to ensure a safe working environment. Typically, the specification list for a motor for the offshore industry can be extensive – aside from the regulatory standards for flameproof or explosion proof design, the type of paint, various supply options and suitability for tropical climates can all add to the challenge of finding exactly the right motor. 

Camis also offers considerable expertise in DC motors, especially when it comes to creating a new installation. One of the most important aspects of a design is matching the resistors to the motors to ensure continued reliability in service. Camis can create a ‘plug & play’ cabinet that incorporates all of the required control circuits as well as matched resistors to provide the optimum solution. 

Hydraulic and electrical controls for a bespoke hydraulic filtration unit
Hydraulic and electrical controls for a bespoke hydraulic filtration unit

Electronics and wiring 

Camis Electronics is a leading manufacturer and distributor of engineering solutions, especially electronics products and wiring solutions. The company has its own in-house design expertise and engineering knowledge, capable of delivering mass-produced items as well as tailor-made, one-off concepts. 

At the heart of this division is the cable assembly and loom business, which offers design and sub-contract manufacturing. From the simplest single wire and connector to complex wiring looms and electronic control systems, Camis delivers high quality products on short lead times. 

Primarily working with the off-highway sector, security and catering equipment as well as water treatment plants and materials handling applications, Camis offers flexible manufacturing facilities that can be applied to a wide range of electrical and electronic challenges. 

Rob Burrows Technical Manager for Camis Electronics
Rob Burrows Technical Manager for Camis Electronics

Rob Burrows, technical manager, explains: “We work closely with our customers to develop exactly the right solution for their product. From custom circuit boards to building in-house test rigs for optimum quality control, we ensure that every aspect of the design is delivered on time. 

“Our state-of-the-art equipment ensures that every wire is cut, stripped, twisted, ferruled, crimped and labelled perfectly every time. We appreciate that our products have to work faultlessly with many others that are connected to them, to ensure reliable operation of the OEMs equipment.” 

Camis also designs and manufactures wiring looms and electronic controls, such as joysticks for the off-highway sector. As a distributor for several major component manufacturers, such as Pepperl & Fuchs, Crouzet, Johnson Electric and Saia Burgess, Camis also offers cost-effective control solutions. 

By working closely with OEMs, the design engineers can quickly develop a concept into a prototype and, after successful testing, full production. With capacity to deliver 40,000 looms per year, the production area has the flexibility to ensure delivery deadlines are met, with every loom being quality checked and tested before dispatch to the customer. 

Bespoke control systems are designed, built and tested for OEMs
Bespoke control systems are designed, built and tested for OEMs

Accident prevention product 

One example of the company’s capability is a project to create a warning system for HGV drivers to ensure that their trailers are correctly coupled before they drive off. With so many products delivered by articulated lorries, drivers are repeatedly required to drop off one trailer and connect up to another. This is not just at the distribution hubs, but at ports and logistics centres around the country. 

Each time a trailer is coupled to the tractor unit, the king pin must be securely located in the fifth wheel and held in place by the locking bar. If, for any reason, this procedure is not completed correctly, there is a risk of the trailer dropping to the ground when the tractor unit pulls away. This can cause significant delays in delivery of the goods as well as serious damage to the trailer itself. 

Camis has been working with an OEM to develop an in-cab warning system for the driver to alert them to any part of the procedure that has not been completed correctly. The system involves a number of sensors, a basic processor and a warning light located in the cab. 

Having completed testing of the prototype system, Camis has created a production test rig that is being used to ensure perfect operation of every product. Today, orders are placed by the OEM for delivery to coincide with their build schedule. 

Electronic control circuitry can be designed and manufactured to suit each application
Electronic control circuitry can be designed and manufactured to suit each application

Hydraulic maintenance system 

On a slightly larger scale, Camis was approached to see if it could create a system for cleaning the hydraulic oil from a tram. The operators were looking for a new piece of equipment that could reduce the time to half a day required to complete periodic maintenance, which currently stands at five days. 

The design brief asked for a mobile cleaning station that could evacuate the hydraulic system of the tram, clean the oil using filtration to a level of microns, check for cleanliness using laser refraction and then refill the hydraulic system. This process was to be repeated until all of the contamination has been removed from the hydraulic system. 

Timings were agreed with the tram operator and once the concept and the processes were signed-off, Camis’ design engineers started with component selection and designing the mobile cart that would accommodate all of the equipment. 

The design uses a series of both AC and DC motors to power hydraulic pumps, all controlled through an HMI and a number of contactors. The development process has taken a few months, but it is now coming to a close. The expectation is that the new hydraulic maintenance station will enable the oil cleaning process to be completed within half an hour, a considerable improvement on the current time. 

Rob Burrows concludes: “Having created the first unit of its type, we are looking at other applications for a similar maintenance trolley, such as dockside forklift trucks. Any machine that uses hydraulics can suffer from contaminated oil, which can cause premature wear in pumps and damage seals. 

“Just changing the oil is not the solution, much of the contamination will remain in the hydraulic tank and still cause problems. By repeatedly cycling the oil through the cleaning system, the vast majority of the debris is removed. By minimising the time required to complete this process, we are reducing machine downtime and cutting maintenance costs.” 

Camis brings together a unique combination of expertise and knowledge that can be applied to a wide variety of applications. From specialist electric motors and controls to bespoke electronics and wiring looms, Camis has the breadth of understanding that is needed to ensure a successful project. 

OMEC Motors Distributer

0

Winkelmann develop and produce DC and three-phase asynchronous motors. Main products include IEC DC Motors, Flameproof DC Motors and three phase asynchronous motors.

Website: www.w-winkelmann.com


ICME
have more than thirty years of experience in manufacturing small and middle-sized electric motors. The range includes three phase, single phase and brake motors.


ATAV
offers a range of motors that is particularly adapted to the ventilation market and mass equipment production. The range comprises three-phase and single-phase motors that are certified in the T4 temperature class, the main characteristics of which include reduced size and an attractive price based on a minimum annual volume.

Website: www.atav.be/en/


Cemp
 has developed the most comprehensive range of electric motors for hazardous areas: flameproof, increased safety and non-sparking for the oil & gas, marine and mining industries.

Website: www.cemp-international.it/en/home-eng/

Whether water-cooled or explosion-proof, EMOD has the right drive for every application. Highly trained specialists and high-performance special tools ensure that EMOD can tackle complex special requirements. From planning, design, through to delivery and assembly, everything comes from a single source.


Website:
 https://www.emod-motoren.de/

Kaiser Motoren concentrates on special motors for textile machines, food pumps and medical centrifuges with speeds up to 30,000 rpm. They also offer expertise in the field of simulating special drive problems with inverter operation.

Website: https://www.kaiser-motoren.de/en/

With its own manufacturing, distribution, R&D and customer service teams, OMEC Motors provides continuity, reliability and integrated solutions across a range of industry sectors.

Website: https://www.omecmotors.com/

SEW-EURODRIVE is one of the leading manufacturers of drive technology in the world. Their product range includes gearmotors, gear units, electric motors, components for decentralised installation, electronically controlled drives, mechanical variable-speed gear units, as well as bespoke drive solutions.

Website: https://www.sew-eurodrive.co.uk

Winkelmann

0

Winkelmann develop and produce DC and three-phase asynchronous motors.

Main products include IEC DC Motors, Flameproof DC Motors and three phase asynchronous motors. Winkelmann are certified according to DIN EN ISO 9001 : 2000.

Website: www.w-winkelmann.com

Electronics Manufacturing Solutions

0

CAMIS Electronics specialises in the design, prototyping & manufacture of electromechanical products.

Operating from our modern factory in the heart of the UK our team of skilled professionals are able to assist you to bring your products to life.

CAMIS design, prototype and manufacture a large range of bespoke electromechanical products for customers from a variety of different industries.

Camis have many clients who choose to use our subcontract manufacturing service for either part or complete electromechanical products because we are able to offer:-

  • Electronic products that are right first time
  • Electronic products that are delivered on time
  • Electronic products that are cost effective

The Camis team and their many contacts in the world of finance are able to help inventors to get project finance to assist at each stage of the project development.

We will work with you to bring your ideas to fruition.

EMOD

0

EMOD is a German manufacturer of motors. EMOD’s product range offers a large range of different product types.

CEMP Flameproof Motors

0

Cemp, Leading ltalian manufacturer of electric motors and electric pumps, has developed the most comprehensive range of electric motors for hazardous areas: flameproof, increased safety and non sparking.

ATAV

0

ATAV offers a range of application motors that are particularly adapted to the ventilation market and mass equipment production. This range comprises three-phase and single-phase motors that are certified in the T4 temperature class and the main characteristics of which include reduced size and an attractive price based on a minimum annual volume. Technical data is available for the motors in this range.

Dutchi Motors

0

Providing high quality, competitively priced motors for over 35 years Dutchi is a leading name in the motor industry.

Based in Arnhem, Dutchi manufacture a complete line in aluminium and cast iron motors. The motors are supplied all over the globe.

Website: www.dutchi.com

Dutchi motors available from Camis Motors & Drives:

EFF1High Efficiency AC DC Motors

Camis Motors & Drives offer the full range of Cemep EFF1 Motors from Dutchi. Listed on the “UK Technology List” and qualifying for ECAs under the government scheme. The motors are available in aluminium up to 132 frame and up to 280 frame in cast iron. Camis Motors & Drives provide a full motor modification service for EFF1 motors.

EFF2
High Efficiency AC DC Motors
Camis Motors & Drives has a comprehensive range of EFF2 Motors from Dutchi. EFF2 Motors are available in both Aluminium (56-132 frame) and Cast Iron (80-400 frame) covering powers from 0.06kW to 630kW. Aluminium range is DMA2 and the Cast Iron range is DM1. You can download DMA2 motor certificates from this website. Camis Motors & Drives provide a full motor modification service for EFF2 motors.

Hazardous AreaHigh Efficiency AC DC Motors

Camis Motors & Drives offer a comprehensive range of Motors suitable for Hazardous Areas. Manufacturers include Lambert, Atav and Emod. The Range includes 3 phase, Single phase aluminium and cast iron, Eexd (T4) and EEXde (T1 – T4). Mainly 2C as standard all products are Atex certified and are widely used in a range of applications.

Force Vent MotorsHigh Efficiency AC DC Motors

Camis Motors & Drives offer a complete range of Force Vent Motors and Force Vent kits from Dutchi. Force Vent Motors are available from 63 frame to 400 frames and can be supplied from stock as a stock modification.

Fume Extraction Motors

Camis Motors & Drives offer a range of fume extraction motors inboth 4 pole and 6 pole designed to withstand 400 degree C for 2 hours. Motors are available in 112 frame to 400 frame (3kW to 560kW).

Cap’ start / Cap’ runHigh Efficiency AC DC Motors

Camis Motors & Drives have a range of Cap’ start / Cap’ run motors from Dutchi and ICME. Motors are available in both 110V and 230VAC in frame sizes from 63 frame to 132 frame. This covers powers up to 2.2kW.

Drip Proof Motors

Camis Motors & Drives offer a full range of IP23 open drip proof motors from 160 frame through to 355 frame (11kW to 630kW).

High Voltage MotorsHigh Efficiency AC DC Motors

Camis Motors & Drives offe a range of high voltage motors manufactured by Dutchi. The range is available in 3.0kV / 3.3kV / 6kV and 10kV, 50 to 60 Hz up to 2800kW. Motors are avaialble in IP44 / IP54 / IP55 and benefit from high efficiences and excellent starting performance.

Permenant Cap’ MotorsHigh Efficiency AC DC Motors

Camis Motors & Drives have a range of Permenant Cap’ motors from Dutchi and ICME. Motors are available in both 110V and 230VAC in frame sizes from 63 frame to 132 frame. This covers powers up to 2.2kW.

For more information please call Camis on +44 1384 286969.